z170 pro4s no display
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2168
Printed Date: 19 Jul 2025 at 8:29am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: z170 pro4s no display
Posted By: keysersoze184
Subject: z170 pro4s no display
Date Posted: 07 Mar 2016 at 9:29am
| This is my first build and I'm a little lost, I have everything connected and it powers up with fans workin, but the hdmi port has no display on my TV |
Replies:
Posted By: Jh4life
Date Posted: 28 May 2016 at 8:41am
Same problem. Only a few more days for return.  Support doesn't seem to understand the manual seems to be incorrect. Seems to be a common problem with this mobo. Or either you need a monitor. Either way a few pieces of info could help me make it work; However if they don't provide the support then the product is ultimately defective. |
Posted By: Xaltar
Date Posted: 28 May 2016 at 4:43pm
|
You could try clearing CMOS. Do you have a DVI monitor to test with to ensure the board is actually posting? ------------- 
|
Posted By: Jh4life
Date Posted: 29 May 2016 at 2:30am
|
I don't have a DVI monitor. Which I was trying to ask support; however it is too late. Not my first rodeo to be treated like an idiot. "FIRST YOU BOX IT..." Just to clarify not saying the moderator is treating me like an idiot. And yes I cleared the CMOS multiple times. Once memory is in: -No more three beeps -No one beep to signify that there is no GPU installed. I have also moved my ram (kingston which should be supported according to the adverts.) to every combo of slot as listed in the manual or online. Nothing. Everything brand new? Are you suggesting two sticks of new ram are bad? Faulty Product, Bad manual, and/or Bad Support. Figure it out; not trying to be mean but it will cost you more in the long run than me. |