Networking Products - G10 date and time

Print Page | Close Window

G10 date and time

Printed From: ASRock.com
Category: Media&User's Review
Forum Name: Networking Products
Forum Description: ASRock Networking Products
URL: https://forum.asrock.com/forum_posts.asp?TID=2224
Printed Date: 24 Nov 2024 at 6:04pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: G10 date and time

Posted By: redgallows
Subject: G10 date and time
Date Posted: 14 Mar 2016 at 5:53am

I have a G10 router running as an AP.

The only place I can see the date and time is in the "system log", however the date, year and time are all wrong. It's showing year 1970. Even I set the timezone accordingly, the date and time are still wrong.

Is there anyone know where to set the date and time?

Replies:

Posted By: dx2
Date Posted: 21 Apr 2016 at 2:41pm

I think it checks time/date automatically, IF it has a valid WAN connection.
If you use it as an AP, normally you don't connect the WAN, so it cannot check for date.
Try/test to use it as a normal router (I know, it will put your wireless devices in another subnet) and see if it's working.

It's already listed in
http://www.asrock.com/Networking/G10/support.html#FAQ.
Check for the next question and read the last line of it.

How to configure G10 as an access point ?

Posted By: redgallows
Date Posted: 23 Apr 2016 at 1:12am

Thanks for the reply, date and time has no issue if WAN is connected to the modem.

I also reach out to ASRock tech support for this and the response is pretty much that AP mode is just a work around, thus date and time won't work properly.

It's a little bit disappointed for such a powerful router lacking AP mode functionality.
Hopefully ASRock development consider to add this in the future.