AMD Motherboards - N68-VS3 UCC

Print Page | Close Window

N68-VS3 UCC

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2273
Printed Date: 31 Oct 2025 at 8:59pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: N68-VS3 UCC

Posted By: DmitryB
Subject: N68-VS3 UCC
Date Posted: 21 Mar 2016 at 6:30pm

How to enable ahci mode for N68-VS3 UCC? Nvidia 630a support this feature.

Replies:

Posted By: wardog
Date Posted: 21 Mar 2016 at 8:04pm

MCP65 and up chipsets support AHCI.

The 7025 is the MCP61.

From Fernando over at win-raid, whom I've known for years and years. I am one of his original guinea pigs since he began assembling his Driverpacks on nForcersHQ.

http://www.win-raid.com/t15f37-NVIDIA-Optimized-nForce-Driverpacks-for-Vista-Win.html

Fernando wrote:

Important:

Only my "Actual nForce Driverpacks" are optimized for the advanced AHCI features, which are supported by the latest nForce chipsets from MCP65 up.

Posted By: DmitryB
Date Posted: 25 Mar 2016 at 8:28pm

630a is:
MCP67 if you look at the forum on www.win-raid.com
MCP68SE if you are using special utils (AIDA64 etc.)

Posted By: DmitryB
Date Posted: 25 Mar 2016 at 8:39pm

very wrong, that after rebooting the controller determines the ssd drive mode each time differently (sata 1/2), thus limiting the speed

Posted By: DmitryB
Date Posted: 11 Apr 2016 at 5:27pm

for example see Asus m2n68-am (NVIDIA Geforce 7025 / nForce 630a) - AHCI mode is present!