4K 60hz z170
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2278
Printed Date: 21 Dec 2024 at 8:19pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 4K 60hz z170
Posted By: Blahx9
Subject: 4K 60hz z170
Date Posted: 22 Mar 2016 at 8:09am
|
Hi, I am unable to display 4K 60HZ from hdmi jack 2 on my Fatal1ty z170 mini itx. I've updated the firmware to support HDMI 2.0.Installed drivers in order when building system. Tested three cables, monoprice(6ft), Amazon basic high speed(6ft), twisted pairz 2.0 cable (10ft) I have no other equipment to test 60HZ on. 4K 30HZ works fine. When I change refresh to 60HZ my screen goes blank then reads no single- times out to previous setting. Hardware: Vizio M60-C3 I5 6600 3.3Ghz Samsung m.2 GSKILL TRIDENT 3200 16GB Fatal1ty z170 mini itx/ac |
Replies:
Posted By: ocFTW
Date Posted: 11 Apr 2016 at 4:24pm
Same here  Also did the update firmware for the hdmi, which by the way asrock needs to update the readme/pdf You can't just run the exe after extracting, i had a gtx970 installed and would get an error to shutdown the system. After some searches on google i found a post on tom's that said you had to do it without external gpu and the update finally worked BUT the actual output from the board's hdmi 2.0 port will not do 4k60 reliably, hell it won't even connect at 30hz a lot of the time after the supposed firmware update; the secondary hdmi 1.4 output on the board is ok for 4k30 I know it is not my cables or display because i have no problems when connected to the gtx970 |
Posted By: bmouse
Date Posted: 12 Apr 2016 at 3:21pm
| I am able to get connect for 4K@60hz to my Z170 itx/ac@HDMI2. It is not stable though comparing to DP1.2. |