Trying to install a SSD on a 775Dual-VSTA
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2297
Printed Date: 29 Dec 2024 at 12:52am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Trying to install a SSD on a 775Dual-VSTA
Posted By: oldasusmobo
Subject: Trying to install a SSD on a 775Dual-VSTA
Date Posted: 24 Mar 2016 at 11:09am
|
So I've been fighting with this thing all day. I currently have a standard sata installed on the system, I connected VIA usb to use samsung migration software. Installed the new SSD and nothing. Tried various bios configuration etc. The only way the computer will detect it is via usb. But nothing when directly connected to the motherboard. Any help would be appreciated.... and if all else fails... my second question is: If I get a PCI sata expansion card do think I would have the same outcome? Thanks
|
Replies:
Posted By: parsec
Date Posted: 24 Mar 2016 at 11:56am
|
What version of Windows are you using? It seems you have a new Samsung SSD, never used before, correct? Is the SSD seen in the BIOS? What is the SATA Operation Mode option set to? Any new drive must be initialized and formatted before it can be used, or recognized by Windows. That is still true today with Windows 10. Normally to initialize a new drive, you start Windows Disk Management, which should immediately recognize that the new drive(s) must be initialized and prompt you to do so. After that is complete, you will need to format the drive in Disk Management. Your board's VIA VT8237A chipset provides two SATA I ports. The only SATA mode options are RAID and non-RAID. What little I could find about this chipset said it did not support NCQ, so no support for AHCI, even in RAID mode. Whether or not this chipset will pass TRIM commands to a SSD, or if your OS supports TRIM, are both unknowns. Don't expect to get anywhere near the rated read and write speed performance of your SSD. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: oldasusmobo
Date Posted: 25 Mar 2016 at 5:02am
|
Windows 7 32bit SP1 Brand new drive. Doesn't show in bios when connected directly to the motherboard. I thought that might be an issue. I may just replace with a new regular HDD as the old one is getting sluggish. Computer still works great and isn't used much.
|
Posted By: parsec
Date Posted: 25 Mar 2016 at 11:59am
|
Double check the SSD's data and power connections, trying a different cable, particularly for the data cable. Sometimes it takes a restart or two for a new SSD to be recognized. If the SSD is detected with a USB connection, then the SSD is not defective. If you are using Win 7, then you will have TRIM, even in IDE mode. I suppose it is possible the VIA chipset only supports a very early version of SATA, so a SSD might not be recognized. I wonder what the SATA mode actually is, and where the SATA controller appears in Device Manager, and what driver that controller is using. That information is NOT the Properties of the SSD itself, it should be shown under IDE ATA/ATAPI controllers in Device Manager. IMO, it's the VIA chipset that is not up to working with a SSD. It's a ten year old board, a lot has changed in that time.  ------------- http://valid.x86.fr/48rujh" rel="nofollow">
|