Print Page | Close Window

Asrock Z490 taichi alll USB ports are dead

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=23377
Printed Date: 28 Apr 2024 at 1:56pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Asrock Z490 taichi alll USB ports are dead
Posted By: babanna1
Subject: Asrock Z490 taichi alll USB ports are dead
Date Posted: 25 Mar 2022 at 11:45pm
Hello guys I am new here.
I have Asrock Z490 Taichi MB , and it suddenly back USB ports are stopped working, however DP and HDMI are fine.
Please help, what could this be? Well I noticed there were 2 pins of cpu socket been bent and I fixed them. I think after that happened , usb ports are stopped working.
Any ideas guys



Replies:
Posted By: threadzipper1957
Date Posted: 09 Aug 2022 at 6:03pm
When currents, inside the CPU start to flow different, it can damage the CPU.
Check the ins in the socket again, and when fitting a CPU cooler, do NOT overtighten it, as long as it is flat on the CPU surface, and cannot move around, the pressure is within Intel specs.
Besides Noctua, most coolers go way beyond the Intel specs, when it comes to the rpessure they apply onto the CPU/Socket
As a result, the CPU bends, and this in return cause contact problems.
When the pressure is really high, the socket pins can become stuck, in the landing pads on the CPU, and when removing the CPU, pins can be damaged.

-------------
Kind Regards



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net