Intel Motherboards - Post status checker boot and vga on

Print Page | Close Window

Post status checker boot and vga on

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=24649
Printed Date: 22 Dec 2024 at 12:34am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Post status checker boot and vga on

Posted By: glicuado
Subject: Post status checker boot and vga on
Date Posted: 19 Jun 2022 at 1:54am

Just purchased z690 phantom gamming 4/d5

it only has
Samsung - 980 PRO 500GB PCIe Gen 4 x4 NVMe on m2_1
Crucial CT16G48C40U5 on b1
Intel AX211NGW in m2_wifi1
HDMI monitor connected with no signal
network cable

PSC starts boot, dram and vga turn on, cpu does not turn on, a few seconds later dram turns off and boot and vga stay on.

I disconnected without success samsung 980 and fifi card, I pressed the rear reset button, nothing changed.

No beeps, no video signal, dead

Any idea?

Replies:

Posted By: glicuado
Date Posted: 19 Jun 2022 at 2:00am

I do have atx12v1 power connector plugged

Posted By: glicuado
Date Posted: 19 Jun 2022 at 2:13am

checking again, CPU led seems to blink faintly very fast and turns off