Print Page | Close Window

No diagnostic beeps

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=24675
Printed Date: 29 Apr 2024 at 12:53am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: No diagnostic beeps
Posted By: jdk
Subject: No diagnostic beeps
Date Posted: 27 Jun 2022 at 6:38am
Having trouble with a B450M Pro4 that won't boot. No video and weird USB (keyboard/mouse) behaviour. Frustratingly I'm not getting any diagnostic beeps (I have a speaker connected to the spk pinouts). I had read that the default setting in the bios is for the beeps to be disabled. If so, how do I enable them without access to the bios? Or is this board just fully fried?

Have gone through the full list of diagnostic steps including a hard cmos reset and swapped most components.



Replies:
Posted By: Xaltar
Date Posted: 27 Jun 2022 at 11:02pm
What are the specs (including PSU model)?
Is this a new issue on a previously working system or a new build?
What (if anything) caused the issue?


-------------


Posted By: jdk
Date Posted: 28 Jun 2022 at 11:54am
New build. PSU is known good. Tried multiple GPUs. CPU and ram could theoretically be bad but confused as to how they'd cause the symptoms seen here.

Base question though: why am I not getting any beep codes? Are they indeed turned off by default? (I get the boot beep being off but diagnostic beeps in case of a fault should really always be on).


Posted By: miffril
Date Posted: 30 Jun 2022 at 5:00am
You PC restarts every 30 seconds or so?


Posted By: jdk
Date Posted: 30 Jun 2022 at 2:20pm
Nope, never starts at all, and no apparent restart cycle. Looking like it may be an RMA. Still confused as to why no beep codes though.


Posted By: Xaltar
Date Posted: 30 Jun 2022 at 3:39pm
Generally no beep codes = bad. As far as I am aware the "disabled" setting in the
BIOS only disables the POST beep. Errors should still cause a beep code.

-------------


Posted By: jdk
Date Posted: 01 Jul 2022 at 3:25am
Thanks for that Xaltar. Definitely confirms there's something wrong with the board itself then.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net