AMD Motherboards - X570 Taichi weirdness when changing settings

Print Page | Close Window

X570 Taichi weirdness when changing settings

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=24730
Printed Date: 03 May 2024 at 5:44am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X570 Taichi weirdness when changing settings

Posted By: asdf23451
Subject: X570 Taichi weirdness when changing settings
Date Posted: 12 Jul 2022 at 11:43am

I've noticed, specifically when trying to change CPU voltages and clocks, that sometimes my settings appear to not take effect until I change them again.

For example If I want to revert back to auto CPU clock and voltage, just selecting auto does nothing. If I re-enable it and set the clock and voltage back to default, save, then set it back to auto, it works fine.

I'm running 4.80, but I have had this issue with previous BIOS releases too.

Replies:

Posted By: threadzipper1957
Date Posted: 22 Jul 2022 at 10:17pm

Overclocking and undervolting is always a matter of trial and error.
After the settings are saved, the BIOS will try to use these settings, but like in DRAM timing a lot of values, are set to auto

-------------
Kind Regards