EPYCD8-2T fails to reboot
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=24756
Printed Date: 05 Aug 2025 at 5:39pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: EPYCD8-2T fails to reboot
Posted By: maddios
Subject: EPYCD8-2T fails to reboot
Date Posted: 22 Jul 2022 at 10:41am
Hi guys, I've got an EPYCD8-2T motherboard which boots and runs just fine, but when I reboot it hangs up with code 11 on Dr Debug, at this point hitting reset or shutting it down and back up will fix it. I've been using IPMI to get around the issue but it's starting to concern me.
CPU: AMD EPYC 7371
Memory: 2x 32GB registered ECC 2933MT/s
Storage: 2x WD Blue SN570 1TB M.2
Firmware Information
BMC Firmware Version 2.20.00
BIOS Firmware Version P2.60
PSP Firmware Version 0.7.0.6E
Microcode Version 08001227
Any ideas are welcome.
I've tried to move the ram to different slots so far. But again it boots just fine, it's just reboot that screws it up.
|
Replies:
Posted By: threadzipper1957
Date Posted: 22 Jul 2022 at 8:24pm
Please visit the ASRock Rack website, or use the support form
https://event.asrockrack.com/tsd.asp" rel="nofollow - https://event.asrockrack.com/tsd.asp
When using a GMAIL account always check the spam folder, for replies
This forum is mainly for desktop (ASRock) products, ASRock Rack, and ASRock industrial, can be reaced via their website support form
-------------
Kind Regards
|
|