B460M-HDV fails to boot with dual RAM config
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25002
Printed Date: 26 Apr 2024 at 11:06pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B460M-HDV fails to boot with dual RAM config
Posted By: boom_shiva
Subject: B460M-HDV fails to boot with dual RAM config
Date Posted: 17 Oct 2022 at 7:33am
|
CPU: Intel i5 10400F CPU Cooler: Stock RAM: 16GB DDR4 (GSkill F42666C19S-8GIS X 2) Motherboard: Asrock B460M-HDV GPU: Asus GTX 1660 Ti Storage: 120GB HP SSD+ 1TB Seagate HDD I bought new components about a month ago. In the beginig the PC ran without any problem. But recently, I started getting 'No input signal' issue after powering up the PC. After basic troubleshooting and resetting CMOS, the issue went away, but occurred quite frequently after that. After some more troubleshooting, it became clear that 'No input signal' issue on starup occurred only when two ram sticks were equipped in the slots. I have tested ram sticks individually in both the ram slots. Both slots are working fine with either of the ram sticks. Windows boot with either of the ram sticks equipped in any one the ram slots. Its just the dual channel ram config that is giving me hard time when using these GSkill sticks. I tried using a pair of Corsair 8GB 3200MHz sticks, using which the pc booted absolutely fine. |
Replies:
Posted By: bjlockie
Date Posted: 17 Oct 2022 at 11:51am
|
What version of the BIOS do you have? Try increasing the voltage to the RAM (don't go over 1.35v). OR Ask gskill support. That motherboard is on their QVL list. ------------- ASRock B450M Pro4 16 GB DDR4, 500 watt PS, AMD Ryzen-5 5600, NVidia GTX-1050, 5.70 BIOS |
Posted By: boom_shiva
Date Posted: 19 Oct 2022 at 12:59am
|
Bios version is P1.60. Increasing RAM voltage to 1.35V from 1.20V solved the issue. Thank you. 
|