Intel Motherboards - NVME 4x4 not showing in bios. Z690 RS PRO

Print Page | Close Window

NVME 4x4 not showing in bios. Z690 RS PRO

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25006
Printed Date: 20 Apr 2024 at 6:44pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: NVME 4x4 not showing in bios. Z690 RS PRO

Posted By: redBEANburritoz
Subject: NVME 4x4 not showing in bios. Z690 RS PRO
Date Posted: 19 Oct 2022 at 3:51pm

I recently bought a SK Hynix Platinum P41 and i installed it onto my mother board and found the drive in windows but it is not showing up in my bios. i want to set it up as my boot drive but only my SATA SSD shows in the boot options. i see the nvme in my drive list in bios but not as a boot drive option. Any help would be awesome!

Replies:

Posted By: threadzipper1957
Date Posted: 19 Oct 2022 at 10:14pm

Setting up a boot device, is determined by the boot manager from your OS, Windows literally calls it Windows boot manager.
When you want to have the M.2 as boot device, there are 2 options.
1. clone the SSD to the M,2, and after successful, wipe the SSD
2. do a clean installation of Windows, but first wipe all partitions from the SSD, and the M.2
Once that is done, disconnect the SSD, and do a clean install of the OS, this way, bootmanager and all partitionsm are stored, on the same device
When booting, press f11 for the bootmenu, your USB device, is maybe twice in the list, and you must use the UEFI device, then your S will be instaleld in UEFI (GPT) Mode

-------------
Kind Regards