Resizable Bar Support Fatal1ty AB350 Gaming-ITX
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25087
Printed Date: 22 Dec 2024 at 12:13pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Resizable Bar Support Fatal1ty AB350 Gaming-ITX
Posted By: SYS64738
Subject: Resizable Bar Support Fatal1ty AB350 Gaming-ITX
Date Posted: 14 Nov 2022 at 10:50pm
|
Hey there, I am using a r5 3600 and a rx 6800 with this Board currently using bios 6.60. As far as I know that version has no option for rebar for the 3000 series of ryzen processors. My question is if there is rebar support with the newest bios update released this month and if anyone has experience regarding stability of the bios? ------------- https://valid.x86.fr/wgjzle" rel="nofollow"> 
|
Replies:
Posted By: wino
Date Posted: 14 Nov 2022 at 11:35pm
|
I have this board, Ryzen 5 5600 processor and the latest 7.40 BIOS. Everything works fine. I also have "Above 4G Decoding" and "Re-Size BAR Support" options in the BIOS, which I can Enable. However, I have an old GTX 1050Ti card, so I can't check if it works well :) ------------- AB350 Gaming-ITX/ac 10.31 BIOS | Ryzen 5 5600 | G.Skill Flare X 2x8GB @ 3466 14-14-14-28 | Zotac GTX 1050 Ti | Kingston KC3000 1 TB M.2 | SilentiumPC Supremo M2 Gold 550W V2 | Plywood case 24x22x21 cm |
Posted By: SYS64738
Date Posted: 15 Nov 2022 at 12:51am
|
Thank you for your reply. Sounds good so far. I remember rebar/SAM being advertised by AMD as a ryzen 5000 feature, which you have. But that was also with the then new 500 series of boards. Experience from Ryzen 3000 users would therefore still be really interesting. I hope there is nothing implemented in the firmware which locks out previous processors like the 3600 that I have from rebar. Since the board has no pcie 4 I want to use the 6800 to its full potential with pcie 3. Currently with bios 6.60 windows does not boot with the ?œabove 4G support??option enabled despite using mbr2gpt to enable CSM off with my windows 10 installation. CSM off and ?œabove 4G??off works though. ------------- https://valid.x86.fr/wgjzle" rel="nofollow">
|