X670 Pro RS RAM problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25139
Printed Date: 25 Apr 2024 at 11:28pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X670 Pro RS RAM problem
Posted By: rouki999
Subject: X670 Pro RS RAM problem
Date Posted: 28 Nov 2022 at 4:03am
Hello,
my Configuration is:
ASRock x670E Pro RS
AMD Ryzen 9 7950x
G-Skill F5-5600J3636D32GX2-TZ5RK 2x32GB
If the systems run with the standard RAM clock of 4800 every thing is fine.
But when I have activate the XMP-Profil.
- the Motherboard loads the XMP-Profile correct and run stable
- but the energy saver modus isn´t any more available
- and if the system should reboot, it stops the prozess after windows is shutdown
-> the reboot prozess stops with a black screen, running fans and LED
-> you can restart the system only with a hard shutdown over the POWER SW
Is there a fix for the problem in the BETA BIOS 1.11.AS03 ?
|
Replies:
Posted By: MyJules
Date Posted: 29 Nov 2022 at 12:02am
|
If it works with lower clock (for ram), then the system is fine. I think you can try the new BIOS but i'd try going from 4800, which you say works, to 5200 as 1st step. If that works, go 5600 but you may need to adjust ram voltage etc.
|
Posted By: Kaibable
Date Posted: 06 Dec 2023 at 1:19am
I have the same Problem. +
I got a real steal on a second 2x16gb stick set of my already installed RAM. When installingen the second set i have the above mentioned problems. I uninstalled the second set and did a couple of changes in my BIOS and got the following results.
Bios Version: 2.02 2023/11/21
Ram Used: 4x G.Skill F5-6000J3238F16GX2-FX5 16GB
2 Sticks run fine on RAM clock of 6000
4 Sticks only run on RAM clock of 3600
As soon as i try to incrementally upgrade the RAM clock to a higher setting the system does not post.
|
|