AMD Motherboards - X399 Taichi and Ram G-Skill

Print Page | Close Window

X399 Taichi and Ram G-Skill

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25161
Printed Date: 05 May 2024 at 9:05am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X399 Taichi and Ram G-Skill

Posted By: PimperloMammolo
Subject: X399 Taichi and Ram G-Skill
Date Posted: 05 Dec 2022 at 6:40pm

good morning i have a problem in the timing setting of my ram.

the ram are Ram DIMM DDR4 32GB G.Skill 3200 CL16 G.Skill KIT (4x8GB) 32GTZB Trident Z [F4-3200C16Q-32GTZB].

The mainboard sees them. It reads the XMP profile and sets timings and frequency to 3,200 16 18 38 and 56

But the mainboard fails to start after rebooting.

If I set a more conservative profile via the XMP menu sometimes it starts but windows returns error.

I was able to boot with these parameters and the whole system is stable.
I am attaching CPUZ parameters.

MY QUESTIONS:

1) is it correct that CPUZ identifies as channel# 4X64-bit instead of quad channel? Or is it the same thing?
2) What BIOS settings should I set to bring my ram to spec 3,200?

Thank you

Replies:

Posted By: PimperloMammolo
Date Posted: 05 Dec 2022 at 6:42pm

I cant' send an attchment image but my CPUZ say:

DRAM freq. 1485.8 MHz (with some lilttle variations)
FSB:DRAM 3:45
16
18
18
38
56
1T