ASRock Z690 Pro Rs not turning on after clearing c
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25163
Printed Date: 27 Apr 2024 at 8:59am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock Z690 Pro Rs not turning on after clearing c
Posted By: Logjan
Subject: ASRock Z690 Pro Rs not turning on after clearing c
Date Posted: 05 Dec 2022 at 9:07pm
Yesterday I was having issues with my motherboard and XMP not booting so I decided to clear the cmos. When I did that however the motherboard stopped turning on and the only life it shows are the rgb leds. I tried the bios flashback, reseating all connections and cpu but still nothing. Is there anything I could do?
|
Replies:
Posted By: Xaltar
Date Posted: 06 Dec 2022 at 3:12am
Make sure the clear CMOS jumper is in the correct position. If it is set in the "clear" position the board will not allow you to power it on.
If the clear CMOS jumper is not the issue then try disconnecting power from the wall, pull the CMOS battery then press and hold the power button for a few seconds. Leave the system like this for an hour then put the battery back in and atempt to power on again.
If neither of those help then try contacting ASRock directly here: https://event.asrock.com/tsd.asp" rel="nofollow - https://event.asrock.com/tsd.asp
Good luck.
-------------
|
Posted By: Logjan
Date Posted: 06 Dec 2022 at 5:08am
Thanks for responding. I don?™t have a cmos jumper installed so I just removed the battery and unplugged power. I?™ll let it sit for a few hours to see if that fixes anything
|
|