B550 Steel legend not booting
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25167
Printed Date: 05 May 2024 at 2:58pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: B550 Steel legend not booting
Posted By: blackswan99
Subject: B550 Steel legend not booting
Date Posted: 06 Dec 2022 at 4:51pm
|
Hi all, I lately bought this configuration for my new PC: CPU: AMD Ryzen 5 5600X MB: ASRock B550 Steel Legend RAM: G.Skill RipJaws 2 x 8GB SSD: Corsaier 500GB SSD GC: XFX RX480 8GB When i turn the power supply on, the board start a "laser show" in the area of the external connectors (I guess this is wanted). But when I power on, the board always stop at the bios code: "0d" ("zero dee"). Also the graphic card does not power up although it is connected to the power supply. Any idea, whats wrong? Thanks for you help, Blackswan ------------- Adrock B550 Steel Legend + Ryzen 5 5600X + AMD RX480 |
Replies:
Posted By: blackswan99
Date Posted: 06 Dec 2022 at 4:56pm
|
The codes I could recognize, are: 00 - 64 - CF - FC ... 98 ... 6E - 01 - 3E - 67 - D4 ... 90 - 91 - 02 - D2 ... 14 - 15 - 0D ... and that stays forever. ... = there are more code but switching too fast to recognize. ------------- Adrock B550 Steel Legend + Ryzen 5 5600X + AMD RX480 |
Posted By: blackswan99
Date Posted: 06 Dec 2022 at 8:24pm
|
Problem solved, it was a malfunctioning memory module. By the way, this is a good source for error codes: https://forum.level1techs.com/t/list-of-dr-debug-bios-codes/114364" rel="nofollow - https://forum.level1techs.com/t/list-of-dr-debug-bios-codes/114364 ------------- Adrock B550 Steel Legend + Ryzen 5 5600X + AMD RX480 |
Posted By: Xaltar
Date Posted: 07 Dec 2022 at 12:19am
|
Sorry I missed your original post. The only code that matters is the one that doesn't change/clear, or, the last one that flashes before the cycle restarts. I am glad to see you resolved the issue. Thanks for posting back here with your solution  ------------- 
|