Ram not working in most slots
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25472
Printed Date: 26 Dec 2024 at 10:26pm Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ram not working in most slots
Posted By: Andove
Subject: Ram not working in most slots
Date Posted: 13 Feb 2023 at 9:39am
To start off, I have four sticks of ram, 2x8 GB and 2x32 GB. I found that the only configuration that boots is when I have one 8 GB stick in the A1 slot. A2 slot gives the '0d' error code, and either B slot shows '22'. If I try a 32 GB stick in the A1 slot, it gives '0d' as well. I'm not sure what's causing this issue, though I'm almost certain that the ram itself is not faulty, as it's been used in other systems with no fault.
Motherboard: ASRock B550 Steel Legend CPU: Ryzen 7 3700x RAM: G-Skill Ripjaws V DDR4 (8GB: F4-3600C16D-16GVKC) (32GB: F4-3200C16D-64GVK) GPU: NVidia GeForce GTX 1080 PSU: Corsair RM650
|
Replies:
Posted By: eccential
Date Posted: 14 Feb 2023 at 9:19am
Is this a new build? How are you installing the DIMMs? It's DDR4, so you just push the darn things down until they SNAP into place. Open the DIMM socket tab at one side, put the DIMM in to get it started, and then uniformly push the whole DIMM down, until the tab SNAPs into place.
32GB DIMMs are 100% 2Rank, and the 8GB DIMMs appear to be fairly old, as GSkill site says the SPD speed is 2133 MT/s. So even those could be 2Rank. 3700X won't be happy driving 4 sticks of 2Rank DIMMs. I highly doubt they'll run at 3600 MT/s.
If I were you, I'd just put the 32GB DIMMs in A2 & B2 slots and forget the 8GB DIMMs. I mean, 64GB isn't enough for you? But 72GB is?
|
|