ascrock b550m itx/ac no display
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25500
Printed Date: 29 Jan 2025 at 8:46am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ascrock b550m itx/ac no display
Posted By: witeks99
Subject: ascrock b550m itx/ac no display
Date Posted: 19 Feb 2023 at 6:41am
| Hello, ive got a problem i bought this motherborad( in the tittle) and ryzen 5 5500. Put it together and ram g.skill trident Z RGB 16gb only one . All cables are pluged and there is no display usb port doesnt work, also the speaker gives 3 beeps. Can someone help me? |
Replies:
Posted By: eccential
Date Posted: 19 Feb 2023 at 7:39am
|
Quick search says 3 beeps means memory error. Bad memory? Improperly seated DIMM? That's as far as I can think of. Just to be sure, you do have a GPU, right? R5-5500 doesn't have iGPU (the die actually has one but is disabled, unlike the 5600G counterpart). |
Posted By: witeks99
Date Posted: 19 Feb 2023 at 2:55pm
| Yes i have gpu rx 580 btw ram i placek well and the RGB i working all the time on them |
Posted By: witeks99
Date Posted: 19 Feb 2023 at 7:33pm
| I buy new ram but now its better problem single stick working but if i pin in secound ram there are not working ?? |
Posted By: Algon33
Date Posted: 24 Feb 2023 at 4:05am
| Has anyone here solved their problem? I have the exact same issue. I bought a b550 m itx/ac, plugged in a Ryzen 3600, 2*&gb Crucial 2666 Mhz Ram, and a GTX 1060 6GB along with a 1TB M.2 drive and I jut can't get a connection. I've tried re-setting everything, but it just doesn't work. The power is clearly working, as the fans start up and the CPU becomes warm after a couple of minutes. So I don't know what's wrong. |
Posted By: Xaltar
Date Posted: 24 Feb 2023 at 4:27am
|
Try with a single stick of RAM in the furthest slot from the CPU. See if that gets you a display signal. ------------- 
|
Posted By: Algon33
Date Posted: 24 Feb 2023 at 5:54am
|
I don't know if that is what did it, but the system is finally booting. Now I get the message: " Copyright (C) American Megatrends, Inc BIOS DATE: 10/20/2022 19:34:36 Ver: 1AQQG210 New CPU installed, fTPM/PSP NV corrupted or fTPM/PSP NV structure changed. Press Y to reset fTPM, if you have BitLocker or encryption enabled, the system will not boot without a recovery key Press N to keep previous fTPM record and continue system boot, fTPM will NOT enable in new CPU, you can swap back to the old CPU to recover TPM related Keys and data. " Not sure what to make of it. But after a quick Google, I think I'll just press Y to reset fTPM, as I don't have an OS installed on this system. Thanks mate! |