ASRock b450m steel legend not detecting m2 nvme
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25560
Printed Date: 04 May 2024 at 8:32pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock b450m steel legend not detecting m2 nvme
Posted By: barlap
Subject: ASRock b450m steel legend not detecting m2 nvme
Date Posted: 03 Mar 2023 at 6:58pm
Hello, recently i updated my pc to Ryzen 7 5800x from:
ASRock B450m steel legend
Ryzen 5 2400g
2x hdd 1tb each
X1 ssd nvme 248gb for windows
Rx 570 8gb
650w power supply
32gb ram
After updating i also upgraded the bios version from 2.90 to 3.60 as it' s mentioned on the asrock website.
After updating the windows ssd is not detected any more and the pc take a very log time to boot when the ssd it's present in the m2 slot.
I tried to take out the ssd and connect one of my old sata 3 ssd and and everything went ok i even installed a fresh windows to check.
Has anybody any ideea about how to make the nvme slot detectable again?
|
Replies:
Posted By: threadzipper1957
Date Posted: 13 Mar 2023 at 11:41pm
The PCIE lanes from slot M2_1, come straight from the CPU, so I don't think it is a board or BIOS problem
https://www.amd.com/en/products/specifications/compare/processors/7221,10466" rel="nofollow - https://www.amd.com/en/products/specifications/compare/processors/7221,10466
2400G, runs at PCI Express Revision 3.0, 5800X, runs at 4.0
But NVME can only be used on M2_1, because the other M.2 slot, supports only SATA
-------------
Kind Regards
|
|