overheating cpu/fans not spinning, wont boot +more
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25564
Printed Date: 06 May 2024 at 7:16am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: overheating cpu/fans not spinning, wont boot +more
Posted By: Magnus1710
Subject: overheating cpu/fans not spinning, wont boot +more
Date Posted: 04 Mar 2023 at 3:13pm
so my second hand pc kept going in reboot loop after i connected a wifi dongle a few days ago. some people said i could try to remove and reapply thermal paste since my cpu was running hot and i just did now it won?™t turn on.
the fans doesnt try to spin at all.
i have tried unplugging gpu, ssd and hdd, tried switching ram and still didn?™t work.
i get error code A2 when ssd is in and when ssd isnt it goes to bios where it says the cpu is 94 celsius.
the only thing i havent checked that i can think is the cpu altough i removed and reapllyed new thermal paste.
pc specs
cpu: i7-4790k
mobo: asrock c226
ram: ddr3 2 2x8 gb
gpu: EVGA 1050 ti
power supply: cooler master gx 750w bronze
-------------
pc specs
cpu: i7-4790k
mobo: asrock c226
ram: ddr3 2 2x8 gb
gpu: EVGA 1050 ti
power supply: cooler master gx 750w bronze
|
Replies:
Posted By: threadzipper1957
Date Posted: 09 Mar 2023 at 11:34pm
Wifi dongles, are a burdon on any board, AMD and Intel, and on all brands.
The Transceiver chip uses the same frequency as, with which USB3 communicates, and can basically render all USB ports, out of use.
When a CPU cooler is fitted properly a CPU should never overheat, I would say max 75 to 80 degrees, if it goes above, it is almost certain a cooler that is not fitted properly
But for support, You should use the support form for ASRock Rack
https://event.asrockrack.com/tsd.asp" rel="nofollow - https://event.asrockrack.com/tsd.asp
Check Your spam fol;der for replies
-------------
Kind Regards
|
|