x670e taichi ppt edc tdc on manual bug£
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25587
Printed Date: 28 Apr 2024 at 7:21pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: x670e taichi ppt edc tdc on manual bug£
Posted By: buttabean
Subject: x670e taichi ppt edc tdc on manual bug£
Date Posted: 09 Mar 2023 at 2:30am
I've installed the latest bios 1.18 and I have a 7950x.
Under smu settings, you'll find edc tdp, tdc ppt. I decided to tweak these from auto since i was reaching 95c in blender composites and was causing crashes to occur from insanely quick spikes
When I turn off eco mode, it seems to not accept my manual inputs and runs the computer at 500mhz. Does this occur for anyone else?
|
Replies:
Posted By: buttabean
Date Posted: 09 Mar 2023 at 2:31am
|
https://imgur.com/a/hZhX2PH" rel="nofollow - https://imgur.com/a/hZhX2PH
|
Posted By: buttabean
Date Posted: 09 Mar 2023 at 2:32am
|
also just noticed it's not showing the core offset either
|
Posted By: buttabean
Date Posted: 09 Mar 2023 at 2:55am
|
i must be doing something wrong because i loaded up bios 1.14 and experiencing the same issue.
|
Posted By: buttabean
Date Posted: 09 Mar 2023 at 3:17am
https://imgur.com/a/i94zAqo" rel="nofollow - https://imgur.com/a/i94zAqo
1.14 with the -30 preset curve shows up but my other settings don't. i guess i'll test a earlier bios and see if it still does this
|
Posted By: buttabean
Date Posted: 09 Mar 2023 at 4:37am
1.11 gave the same results. I noticed if you set the preset to auto, it will take the all core offset
https://imgur.com/a/1wPDwmE" rel="nofollow - https://imgur.com/a/1wPDwmE
|
Posted By: buttabean
Date Posted: 09 Mar 2023 at 4:50am
|
There seems to be two separate sections in the bios to change these setting. amd precision boot and in smu. trial and error at this point to see if turning one on vs the other works.
|
Posted By: buttabean
Date Posted: 09 Mar 2023 at 5:17am
This has to be a bug. I reset the stuff to auto in the amd cpu sections.
I applied the 85c -30 present and booted to windows. loaded up ryzen master and see the curve applied.
I then go to the curve optimizer and set my settings in ryzen master. hit apply and reboot.
They don't show as being. I get a 608 in the blender benchmark and it maxes temp limit of 85
https://imgur.com/a/E6xJGP0" rel="nofollow - https://imgur.com/a/E6xJGP0
I click curve optimizer again and all the setting i set are still there. If I click apply, the home dashboard updates with the correct values without rebooting.
with the applied settings i got a 598 in blender with a max temp of 73c
so idk what to think
|
|