ASROCK A320M-DVS V 4.03 and X4950 memory
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25622
Printed Date: 27 Dec 2024 at 7:10am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASROCK A320M-DVS V 4.03 and X4950 memory
Posted By: alabal
Subject: ASROCK A320M-DVS V 4.03 and X4950 memory
Date Posted: 16 Mar 2023 at 5:29pm
Hello, I have an Athlon X4 950 processor and I bought an Asrock A320M-DVS motherboard.
With this configuration, can I use a 3200 MHz memory that will work at 2400. Does this memory have to be XMP Ready, because the default I see is 2400 MHz. And the cheaper memory by SPD is set to 3200mhz. Will the cheaper one be able to start the computer or at least get to the bios to manually configure the frequency.
Another question , on my motherboard on the bis chip has label 4.10.
Is it bios version or what?
Because version after 7 do not support Bristol Bridge CPUs. And I have not another cpu to flash old BIOS.
|
Replies:
Posted By: eccential
Date Posted: 16 Mar 2023 at 6:53pm
Interesting, I didn't even know AMD made AM4 version of Athlon X4. I see it's actually a Bulldozer family of chips.
Anyway, my guess is that it will work, and here's my thinking.
1. Memory modules have multiple SPD values, rather than just one (JEDEC) or two (XMP). For example, the timing table for my JEDEC 3200MT/s DIMM as reported by CPU-Z lists timings down to 1454MT/s
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 10.0-10-10-24-34 @ 727 MHz
JEDEC #2 11.0-11-11-26-37 @ 800 MHz
JEDEC #3 12.0-12-12-28-40 @ 872 MHz
JEDEC #4 13.0-14-14-31-44 @ 945 MHz
JEDEC #5 14.0-14-14-33-47 @ 1018 MHz
JEDEC #6 15.0-15-15-35-50 @ 1090 MHz
JEDEC #7 16.0-16-16-38-54 @ 1163 MHz
JEDEC #8 17.0-17-17-40-57 @ 1236 MHz
JEDEC #9 18.0-18-18-42-60 @ 1309 MHz
JEDEC #10 19.0-19-19-45-64 @ 1381 MHz
JEDEC #11 20.0-20-20-47-67 @ 1454 MHz
JEDEC #12 21.0-21-21-49-70 @ 1527 MHz
JEDEC #13 22.0-22-22-52-74 @ 1600 MHz
JEDEC #14 23.0-22-22-52-74 @ 1600 MHz
JEDEC #15 24.0-22-22-52-74 @ 1600 MHz
2) CPUs know their own max supported modes, which is 2400MT/s in this case.
3) BIOS knows to limit memory controller speed depending on many factors. So I'd think it'd pick a setting between #7 and #8 for my particular DIMMs. For example, I have an X470D4U system that had just 2 sticks of single-rank 3200MT/s DIMMs, running at that speed. When I put 2 more sticks in and booted, it automatically downclocked to 2933MT/s. I didn't need to do anything to it.
On the other hand, it's possible the old BIOS that support the Athlon might not be smart enough, or have bugs, making it not automatically select a reasonable speed and try for the max value. And of course, you can't update BIOS because newer BIOS won't support the Athlon.
So it's sort of a gamble. If someone here has a Bristol Ridge based CPU, with 3200MT/s DIMMs, they could give you a more definitive answer. Otherwise, maybe you can ask AsRock support to try it. I imagine they have all kinds of CPUs and DIMMs sitting around.
|
|