Asrock OC and Voltage setups
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25640
Printed Date: 11 May 2024 at 3:40am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock OC and Voltage setups
Posted By: sgdv
Subject: Asrock OC and Voltage setups
Date Posted: 20 Mar 2023 at 11:03pm
Am I the only one that would like to see some presets for Z690/Z790 12th/13th Gen products? It would make it so much easier for all users to be able to properly OC and set the proper Voltages with the newer chips.
I'm a bit disappointed in the fact that there is nothing from Asrock directly showing setups for the 12th Gen or 13th Gen chips. I'm sure I'm not the only one who would like to be able to get the most out of their chip and motherboard.
Does anyone know if any one from Asrock reads these forums? If so, could you create some screen shots for the z690 Taichi/z790 Taichi using the 12900k, 13700k, and 13900k showing OC and Voltage settings for speed and low temps.
I think having a set of screen shots from the manufacturer would provide confidence in applying the settings.
Thanks
|
Replies:
Posted By: threadzipper1957
Date Posted: 24 Mar 2023 at 6:41pm
Hello.
Motherboard manufacturers are not very keen on providing this kind of information, and there is a good reason for it.
A: overclocking is not guaraanteed, by any manufacturer
B: it can cause serious damage
C: it is really depending on the other hardware, A cheap PSU, is not as stable asa a good quality
And D: at the moment manufacturers provide this info, and for some reason your CPU, or whole system goes up in smoke, people will hold them responsible.
I find the best way is, to google for overclocking 12900K, or one of the other CPU's, You will find lots of tips, on howto, and acceptit's on your own risk.
-------------
Kind Regards
|
|