Intel Motherboards - Asrock Z390 PRO4 C.A.M.

Print Page | Close Window

Asrock Z390 PRO4 C.A.M.

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25648
Printed Date: 25 Apr 2024 at 4:49pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Asrock Z390 PRO4 C.A.M.

Posted By: Kerosine
Subject: Asrock Z390 PRO4 C.A.M.
Date Posted: 21 Mar 2023 at 10:36pm

Hello everyone.
Does Clever Access Memory that aviable on Beta BIOS 4.70B supports 1080TI?

Replies:

Posted By: threadzipper1957
Date Posted: 24 Mar 2023 at 10:33pm

It is not only the board that supports it, but also the graphics card.
Only the manufacturer can tell, but to my knowledge 1080 support CAM.
It is a MUST, to disable CSM (under boot in the BIOS, and enable Above 4G Decoding.
Then CAM of course also enabled, and it should work.

-------------
Kind Regards

Posted By: TheDON3k
Date Posted: 28 Mar 2023 at 5:00am

From what I can find, it's the 3000s and 4000s from NVidia that support Resizable BAR, as well as their RTX A6000 cards.

Posted By: TheDON3k
Date Posted: 28 Mar 2023 at 5:02am

Here's info right from NVidia:

https://www.nvidia.com/en-gb/geforce/news/geforce-rtx-30-series-resizable-bar-support/" rel="nofollow - https://www.nvidia.com/en-gb/geforce/news/geforce-rtx-30-series-resizable-bar-support/