ASRock B660M Pro RS Motherboard
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25683
Printed Date: 19 Apr 2024 at 8:04am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock B660M Pro RS Motherboard
Posted By: Irfan
Subject: ASRock B660M Pro RS Motherboard
Date Posted: 31 Mar 2023 at 4:38am
|
I bought ASRock B660M Pro RS Motherboard recently and My Cabinet has 4ARGB Fans Connected to 3pin ARGB header, Leds doesn't work. I'm using ASRock Polychrome RGB ver:2.0.129. Only Motherboard led works.
|
Replies:
Posted By: threadzipper1957
Date Posted: 05 Apr 2023 at 4:17pm
Best to use the support form, and provide more details
https://tw.asrock.com/events/tsd.asp" rel="nofollow - https://tw.asrock.com/events/tsd.asp
Check the spam folder for replies
The bord has 2 different RGB headers
1. 12Volt RGB (white connector)
2. 5Volt Addressable RGB header (grey connector)
Both are 4 pin connectors, but ARGB has one pin missing (keypin)
Try with one fan directly connected, becasue for 3 fans, you require a splitter cable, and it is important to have Pin 1, alligned properly.
When the fans are connected to a controller card, that might be the issue, try with one fan directly connected.
Some controllers are steered via a button on the chassis, and in some cases, You need to press the button for a number of seconds, to switch off the button control.
-------------
Kind Regards
|
Posted By: Irfan
Date Posted: 05 Apr 2023 at 4:53pm
Fans Were Connected to 5Volt Header as a daisy chain, no controller, tried with one fan also, does't work.
Tried many Versions nothing helps.
PolychromeRGB(v2.0.110)
PolychromeRGB(v2.0.123)
PolychromeRGB(v2.0.129)
PolychromeRGB(v2.0.138)
PolychromeRGB_v2.0.111_
PolychromeRGB_v2.0.112_
PolychromeRGB_v2.0.114_
Tried flashing with WriteFW from bin folder, it updates APROM and Data to 100% after that nothing happens.
Tried Manually Flashing wICPFLASHADSBv2.exe /File=nu51_3.04
I get the message:
Enter ICP mode.
Company ID: 0x000000FF, Device ID: 0x00FF00FF
Enter ICP mode fail.
There is a wICPFLASHADSBv2.ini file doesn't appear to list my motherboard with the MbSwap and CHController values.
the fans lit up once when Installed and then stopped after rebooting. They would occasionally flash when shutting down.
|
|