DeskMini X300 and onboard graphics
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25733
Printed Date: 25 May 2024 at 4:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: DeskMini X300 and onboard graphics
Posted By: dbeko
Subject: DeskMini X300 and onboard graphics
Date Posted: 06 Apr 2023 at 6:05am
I have a X300 with a Ryzen 5 5600G and a RX-6400 GPU running Windows 11. The RX-6400 doesn't have hardware encoding so I'd like to use the Ryzen 5600G for this purpose. However, I'm not finding a way to enable the use of the 5600G's APU in the BIOS. I was looking for "iGPU" and then enabling it in the BIOS (per a Youtube video I found) but this BIOS doesn't have the "advanced settings" nor this option.
I'm also trying to use this Deskmini with a KVM. The other computer reacts properly to the KVM when I switched to its side. However, I get no video input from the X300's side even though it's powered up. Thanks.
|
Replies:
Posted By: threadzipper1957
Date Posted: 07 Apr 2023 at 5:50pm
I think it's betetr to use the supprot form, and check Your spam folder for replies
https://tw.asrock.com/events/tsd.asp" rel="nofollow - https://tw.asrock.com/events/tsd.asp
Desmini X300 doesn't have a PCIE slot
Styandard, when a graphics card is inserted, the built in graphics will be disabled to free up RAM memory.
Usually there is a Share memory option in the BIOS, sometimes called UMA, when this is set to a predefined size, onboard will stay active.
Sometimes (buit that is depending on the Agesa code, You can find it under Advanced>> AMD CBS>> NBIO Common Options>> GFX configuration
-------------
Kind Regards
|
Posted By: dbeko
Date Posted: 09 Apr 2023 at 8:15am
|
Thank you for your reply. I'll check the BIOS settings as you suggested then check the support forum.
|
Posted By: dbeko
Date Posted: 09 Apr 2023 at 12:52pm
|
I meant the DeskMeet X300; I have a RX-6400 GPU in there; I just updated the BIOS to 1.40E (from 1.10) and still don't see any option you mentioned. Thanks though.
|
Posted By: Alucard
Date Posted: 14 May 2023 at 9:17pm
|
UEFI Advanced tab / press control+Q
|
|