Deskmini A300
Printed From: ASRock.com
Category: Technical Support
Forum Name: HTPC&Gaming Barebone&Others
Forum Description: Question about HTPC&Gaming Barebone&Others
URL: https://forum.asrock.com/forum_posts.asp?TID=25787
Printed Date: 18 Mar 2025 at 4:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Deskmini A300
Posted By: Sidio86
Subject: Deskmini A300
Date Posted: 17 Apr 2023 at 7:43pm
My A300 won't boot when installing a new nvme drive.
https://uk.crucial.com/ssd/p3/CT500P3SSD8" rel="nofollow - https://uk.crucial.com/ssd/p3/CT500P3SSD8 .
SSD series P3
Interface NVMe (PCIe Gen 3 x4)
Capacity 1TB
Form factor M.2 (2280)
If i leave the old drive installed and add new drive in the second slot, it wont even boot to the bios menu, the PC turns on the monitor gets a signal but sits on a black screen. It doesn't matter which slot i install the drive in.
I've also tried removing the old drive and just installing the new drive but its the same issue, pc turns on fan spins but cant even access the bios menu.
Im running bios version 3.70
|
Replies:
Posted By: big_sid
Date Posted: 19 Dec 2024 at 12:04am
|
I've got a very similar problem, Crucial P3 4TB on an A300. Won't POST with it installed in either front or rear M.2 slot. Also updated to BIOS v3.70. Did you ever find a solution?
|
Posted By: Ecto
Date Posted: 06 Jan 2025 at 12:37am
Hi everyone,
Have the same problem with a Crucial P3 500 Go.
Have updated the BIOS to 3.70 but it didn't solve the issue.
So far, the solution I've found is to remove the Crucial P3 to be able to go to UEFI, go to Advanced, then AMD PBS, and set the value to "Enabled" for "M2 Slot".
Saved changes and exit, and put the P3 back.
Upon reboot, the UEFI took a little while to show up, but when it finally did, the P3 is there.
That being said, I have now to install the OS. Hope the solution isn't temporary.
Hope it helps.
|
|