X670E Steel Ledgend EXPO
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25906
Printed Date: 04 Nov 2025 at 10:50am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X670E Steel Ledgend EXPO
Posted By: Ihnako
Subject: X670E Steel Ledgend EXPO
Date Posted: 18 May 2023 at 2:37am
When I bought the X670E Steel Ledgend in the middle of March this year, I could use the Flare EXPO X set (F5-6000J3636F16GX2-FX5) from G.Skill without hesitation. At that time, I had manually updated the BIOS to version 1.18. So far so good, the memory was recognized and worked flawlessly.
However, with the new BIOS versions 1.21 and 1.24 AS02, the EXPO profile is no longer loaded but "gear 2" which limits the memory to 3600MT/s. You can also select JDEC 4800, but this does not correspond to the specification that you originally purchased.
I think the reason for the downgrade is that the memory requires a voltage of 1.35V.
Question to the community / the manufacturer - Will there still be an update here that allows memory to operate again with more than 1.30 V voltage according to EXPO?
My System:
AMD Ryzen 5 7600 (non X)
ASRock X670X Steel Ledgend
64GB DDR5 Flare EXPO X (4x16GB)
3 M2 + 2 SATA SSDs
MSI RTX 3070
|
Replies:
Posted By: threadzipper1957
Date Posted: 23 Jun 2023 at 7:41pm
plese use the support form, and check your spam folder for replies.
https://tw.asrock.com/events/tsd.asp" rel="nofollow - https://tw.asrock.com/events/tsd.asp
-------------
Kind Regards
|
|