X300-ITX (x300 Deskmeet) Wake On Lan does not work
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25956
Printed Date: 30 Jul 2025 at 11:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X300-ITX (x300 Deskmeet) Wake On Lan does not work
Posted By: marcexeu
Subject: X300-ITX (x300 Deskmeet) Wake On Lan does not work
Date Posted: 31 May 2023 at 5:26pm
Hello, it had tried with linux and it works, but with both Windows 10 and 11 it is a no go, following the settings:
Realtek PCIe GbE Family Controller Proprieties - Advanced Tab
ARP Offload - Enabled
Flow Control - Rx & TX Enabled
Interupt Moderation - Enabled
PIv4 Checksum Offload - Rx & TX Enabled
Jumbo Frame - Disabled
Large Send Offload v2 (IPv4) - Enabled
Large Send Offload v2 (IPv6) - Enabled
Network Address - Not Present
NS Offload - Enabled
Priority & VLAN - Priority & VLAN Enabled
Receive Buffers - 512
Recv Segment Coalescing (IPv4) - Disabled
Recv Segment Coalescing (IPv6) - Disabled
Shutdown Wake-On-Lan - Enabled
Speed & Duplex - Auto Negotiation
TCP Checksum Offload (IPv4) - Rx & TX Enabled
TCP Checksum Offload (IPv6) - Rx & TX Enabled
Transmit Buffers - 128
UDP Checksum Offload (IPv4) - Rx & TX Enabled
UDP Checksum Offload (IPv6) - Rx & TX Enabled
VLAN ID - 0
Wake on Magic Packet - Enabled
Wake in pattern match - Enabled
WOL & Shutdown Link Speed - 10 Mbps First
Realtek PCIe GbE Family Controller Proprieties - Power Management Tab
Allow the computer to turn off this device to save power - Flagged
Allow this device to wake the computer - Flagged
Onòy Allow a magic packet to wake the computer - Flagged
Advanced TCP/IP Settings - WINS Tab
Netbios setting - Default
Power Options
Profile - High Performance
PCI Express - Link State Power Management - Off
Turn on fast startup - Unflegged
Sleep - Flagged
Hibernate - Unflagged
Lock - Flagged
Any ideas on what is going on? Thank you all in advance :)
|
Replies:
Posted By: marcexeu
Date Posted: 31 May 2023 at 5:27pm
|
I had forgot to say, Bios is set to PCI Device Power On - Enabled
|
|