aida64 and 1920x480 sensor panel
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=25980
Printed Date: 07 Jul 2025 at 3:51am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: aida64 and 1920x480 sensor panel
Posted By: sgdv
Subject: aida64 and 1920x480 sensor panel
Date Posted: 07 Jun 2023 at 7:00pm
I don't know if anyone has had this problem. I recently installed aid64 and the sensor panel on a Z690 Taichi. The system was working perfectly prior to this.
After installing aida64 and rebooting, the cycle bypassed the Asrock boot screen and went straight to Windows. I uninstalled aida64 and it continued to bypass the logo.
I then installed the panel thinking it needed the hardware to 'close the deal.'
Nope, still did the same thing. I flashed the bios, twice. Eventually, resetting the CMOS would be the only way to access the bios again.
I did a clean Win 11 install and that worked until I setup aida64 and the panel again.
I also started getting the 4 beep system timer failure warning on shutdown. I solved that with reseating the ram. I guess during moving the case and working on it, the sticks loosened.
Has anyone had a similar issue with a Z690 Taichi on bios 15.01?
Thanks.
|
Replies:
Posted By: threadzipper1957
Date Posted: 21 Jun 2023 at 10:21pm
Best to use the support form https://tw.asrock.com/events/tsd.asp" rel="nofollow - https://tw.asrock.com/events/tsd.asp
And check your spam folder for replies.
-------------
Kind Regards
|
Posted By: sgdv
Date Posted: 21 Jun 2023 at 10:38pm
I was able to finally get it to work. I had to find the correct cable connections which had to be different due to the lack of a display port connection on the Intel iGPU.
After I stopped fighting the inevitable, it worked.
|
|