AMD Motherboards - X570 PG4 - BIOS update aftermath

Print Page | Close Window

X570 PG4 - BIOS update aftermath

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=26035
Printed Date: 16 Apr 2026 at 7:26am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X570 PG4 - BIOS update aftermath

Posted By: otherbarry
Subject: X570 PG4 - BIOS update aftermath
Date Posted: 18 Jun 2023 at 5:13am

After updating the BIOS I am unable to set my nvme drive to the default. I set uefi defaults after the flash (per the flash instructions), and I suspect this wiped something I needed configured.

If I use F11, I can boot the drive without issue. I tried disabling compatibility mode, but that did not work. Any ideas what I am missing?

Replies:

Posted By: otherbarry
Date Posted: 18 Jun 2023 at 5:40am

I got it
I set back to defaults, saved and rebooted to bios
Then found another menu, just below that allowed me to toggle the m2 drive as default
saved and rebooted again, and it went directly to windows instead of looping back to the BIOS

not sure why that worked this time, and not on my previous attempts, but hopefully it stays this way. Sorry for the clutter on your board. Hope this helps someone else.