1.28.AS01 [Beta] and memory
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=26176
Printed Date: 04 Nov 2025 at 10:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 1.28.AS01 [Beta] and memory
Posted By: M440
Subject: 1.28.AS01 [Beta] and memory
Date Posted: 18 Jul 2023 at 10:42pm
|
hello, after updating to BIOS 1.28.AS01 from 1.26.AS01 i'm no longer able to run my memory at stock speed. I needed to lower the XMP speed by 400mhz for the system to boot. I had no problems on 1.26.AS01 Asrock B650m-hdv/m.2 g.skill 5600c36@1.2v XMP memory (F5-5600J3636C16GX2-TZ5K) |
Replies:
Posted By: Attreyu
Date Posted: 19 Jul 2023 at 3:07am
|
I'm running 1.26.AS01, so the previous one, but as soon as I switch to the EXPO profile, so from 4800 to 5200 in my case, Windows starts BSOD-ing on me. Earlier I've updated to 1.28.AS01 and it simply disabled one of the fan jumpers, conversely the one used by my CPU cooler pump, lol. This raised my CPU to 104 degrees Celsius, almost too hot to handle, so I've switched back to 1.26.AS01... |
Posted By: M440
Date Posted: 19 Jul 2023 at 4:12am
thank you, what motherboard model you have? |
Attreyu wrote:Posted By: M440
Date Posted: 22 Jul 2023 at 3:24pm
|
after setting same timings on 1.28 bios as 1.26, it still it won't boot at stock speed and I need to downclock the memory 400mhz. Hope for a guide what to set on AGESA 1.0.0.7b or a fix in next bios release. https://ibb.co/61tChmM" rel="nofollow">  https://ibb.co/8bbfkP6" rel="nofollow">  ------------- asrock b650m-hdv/m.2, ryzen 7700x@85watt, arch/kde |
Posted By: Attreyu
Date Posted: 22 Jul 2023 at 3:32pm
|
A620M-HDV/M.2 Ryzen 9 7900X CPU, 64GB memory, Corsair EXPO 5200. |
Posted By: M440
Date Posted: 28 Jul 2023 at 8:08pm
|
i've set the 'nitro mode' in DDR options to 'enable' and after a long wait it boots at stock speed ------------- asrock b650m-hdv/m.2, ryzen 7700x@85watt, arch/kde |
Posted By: oldrjohnson11
Date Posted: 30 Jul 2023 at 6:31pm
| I can't run XMP1 with the 1.28 BIOs at all. The PC will not boot. I went back to the 1.26 BIOs. |
Posted By: M440
Date Posted: 31 Jul 2023 at 3:17pm
i need to wait about 4 minutes 30 seconds for the first memory training. After that it boots like normal. At first i thought it does not boot at all. ------------- asrock b650m-hdv/m.2, ryzen 7700x@85watt, arch/kde |