NVME clear tool
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=26252
Printed Date: 06 Feb 2025 at 5:43am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: NVME clear tool
Posted By: shaniag
Subject: NVME clear tool
Date Posted: 05 Aug 2023 at 5:30pm
Hello, I have the B650M-HDV/M.2 motherboard and in the BIOS I have the option "NVMe sanitization tool". Now when selecting this to clear up my ssd, I have the options "format" and "sanitize". Could someone explain what each of these options does? I could not find any information about it online. When would I use which one?
Additionally, does it wear out the ssd a lot when I often format or sanitize?
|
Replies:
Posted By: M440
Date Posted: 05 Aug 2023 at 7:29pm
shaniag wrote:
Hello, I have the B650M-HDV/M.2 motherboard and in the BIOS I have the option "NVMe sanitization tool". Now when selecting this to clear up my ssd, I have the options "format" and "sanitize". Could someone explain what each of these options does? I could not find any information about it online. When would I use which one?
Additionally, does it wear out the ssd a lot when I often format or sanitize? |
Never used such tools build into motherboard and probably never will because you have dedicated tools for that you boot from USB drive and they are giving you more options and control.
Format should be formatting the partition. This could be useful if you wanted to reinstall the system.
Sanitize should be erasing the drive (writing 0 in every sector) so nobody can read the content of the drive once you for example sell it.
None of this operations should degrade the drive more than regular use.
------------- asrock b650m/hdv.m2, ryzen 7700x@85watt
|
Posted By: shaniag
Date Posted: 05 Aug 2023 at 7:55pm
Hey, do you think the stuck at 0% shown in the video is a bug from ASRock side?
|
Posted By: shaniag
Date Posted: 05 Aug 2023 at 7:56pm
Additionally, do you have suggestions for good CLI programs to do the sanitize stuff?
|
Posted By: shaniag
Date Posted: 05 Aug 2023 at 8:04pm
Here is the video that shows 0%
https://streamable.com/ix3v1u" rel="nofollow - https://streamable.com/ix3v1u
|
Posted By: M440
Date Posted: 06 Aug 2023 at 12:02am
shaniag wrote:
Hey, do you think the stuck at 0% shown in the video is a bug from ASRock side? |
that wasn't enough time to write in every sector of the drive, but again maybe i'm wrong and 'sanitize' is something different or just wiping the partition table
a dedicated program would certainly give more feedback about the operation and the result
shaniag wrote:
Additionally, do you have suggestions for good CLI programs to do the sanitize stuff? |
i would just use linux livecd (like ubuntu or popos) - beside partitioning and disk tools you can use internet etc
------------- asrock b650m/hdv.m2, ryzen 7700x@85watt
|
|