Print Page | Close Window

N3150M issue with 16GB RAM

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2631
Printed Date: 25 Jan 2025 at 11:09am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: N3150M issue with 16GB RAM
Posted By: Eizan
Subject: N3150M issue with 16GB RAM
Date Posted: 10 May 2016 at 5:46pm
First of all, sorry for my English.

I am having a problem installing two new modules of RAM on my motherboard N3150M. It works fine with 8GB (4Gb + 4GB). However, as I use design software and video editing (not my work is my hobby), I decided to go up to 16GB with two 8GB modules. However, when you install these two modules the computer makes the threat of boot during 3 seconds and then off. Then it try to start again and goes out again. And it stays in that loop attempting to start and off.

My tests:

- If I remove the 8GB modules and I install 4GB modules again, it run as usual.

- If use separately any new 8GB RAM module in any slot, the computer runs as usual.

- I've done CLEAR CMOS and the problem persists.

Therefore, only problems when the two 8GB modules are installed. If I only install one of them, work perfectly, regardless of the slot in which they are installed and the module I use.

New RAM modules: Kingston HyperX Fury Black DDR3 1600MHz 8GB CL10 - DDR3

Old RAM Modules: Kingston HyperX Fury Black DDR3 1600 PC3-12800 4GB CL10 - DDR3

SO: Windows 10 PRO 64 bits

The Power Supply is a 750W Corsair. It has some years, but no promlem until now. 

Thanks a lot! 



Replies:
Posted By: Eizan
Date Posted: 11 May 2016 at 9:03pm
With great efforts, I solved the problem by myself. 

Thanks for nothing, Asrock. 


Posted By: marcolintrek
Date Posted: 13 Jul 2016 at 8:20pm
hallo
how did you solved?  I've just posted similar question as the cpu from intel site has a maximum memory size of 8 GB while the motherboard state 16 GB maximum.

thanks for your reply



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net