Intel Motherboards - Fatal1ty X99X Killer BIOS update from 1.10 to 1.50

Print Page | Close Window

Fatal1ty X99X Killer BIOS update from 1.10 to 1.50

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2639
Printed Date: 07 Jan 2025 at 7:19pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Fatal1ty X99X Killer BIOS update from 1.10 to 1.50

Posted By: nyichiban
Subject: Fatal1ty X99X Killer BIOS update from 1.10 to 1.50
Date Posted: 11 May 2016 at 12:14pm

Specs:

Fatal1ty x99x killer

i7 5820K

Crucial 4 x 8gb 2133 (tried to upgrade to G.Skill 4x16GB AEGIS 2400)

850 EVO 500GB x 2

Updated my BIOS since it didn't read the new RAM. Installed the old RAM back in and updated it via the BIOS files form the ASROCK website and updated to 1.40 from 1.1 without an issue. When I went to update to 1.50 the system wouldn't POST. I emailed tech support and they asked me to try to switch from A to B on the BIOS switch. Did that and cleared CMOS and now I get Debug code 99 which when I looked up the FAQ it meant that the videocard has issues.

I tried a different video card the 6850 and it gave me error code d6 which is VGA not recognized.

My problem is that it was working fine until the update to 1.50. Any ideas on how to get it back?!?!