Print Page | Close Window

TPM won't enable in BIOS

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=26621
Printed Date: 27 Dec 2024 at 6:08am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: TPM won't enable in BIOS
Posted By: DarkJon75
Subject: TPM won't enable in BIOS
Date Posted: 15 Sep 2023 at 4:38pm
Hi all,

I'm having an issue getting TPM enabled on my PC. It's a newish build (about 4 months old) and a clean install of Windows 11, which went on without issues.
For reference the basic PC Specs are:

Asrock Z790M PG Lightning D4 with 7.02 BIOS
i5 13600KF (no OC)
ARC A770 GPU
64GB 3200 DDR4 RAM (no OC)
M2 NVMe drives in both slots and a SATA SSD

Secure Boot is enabled and CSM is disabled.

When I enable the Intel Platform Trust Technology in the BIOS, hit F10 and save, the PC makes a loud click, fans stop for a second likes it's completely powered off, then it re-starts. Normally when changing BIOS setting I've found it stays running and just reboots.

Other than that the PC is rock solid. Any ideas or am I missing something obvious?

Thanks in advance,

Jon



Replies:
Posted By: DarkJon75
Date Posted: 15 Sep 2023 at 9:45pm
Nevermind, looks like board has a TPM header and not a TPM chip installed already. Probably explains that one!

Thanks for looking though

Jon



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net