Setup this older motherboard up as a headless storage device on my LAN. Reset BIOS and installed Win10Pro. Using WakeMeOnLAN from a remote PC, confirmed connection to LAN but unable to start. I've been successful setting this up on other boards but this one took a bit more work. Below are my settings which work. Keep in mind, WOL here doesn't work from a cold start. You have to power up and shutdown the PC once. You can confirm everything is ready for WOL when the red LED on the motherboard is lit and the activity light on the ethernet jack is flashing, while otherwise the PC appears to be off. Hope this is helpful if you are having a bit of trouble with this feature.
Driver Used:
From ASRock support page: Intel Lan Driver ver:24.0_PV
(old but works)
In BIOS:
Advanced\ACPI Configuration
- PCIE Devices Power On Enabled
Advanced\Chipset Configuration
- PCI Express Native Control Disabled
- PCIE ASPM Support Enabled
- PCH PCIE ASPM Support Enabled
- DMI ASPM Support Enabled
- PCM DMI ASPM Support Enabled
- Both Intel controllers Enabled
In Windows:
- Locate Shutdown settings
- Fast Startup Not Checked
- Sleep Not Checked
- Hibernate Not Checked
- Lock Checked
In Device Manager:
- Expand Network Adapters
- Select Intel Controller you are using
Repeat settings below for each controller
- Select Power Management
Check all three boxes
- Select Advanced
- Enable PME Enable
- Energy Efficient Ethernet Off
- Wake on Link Settings Forced
- Wake on Magic Packet Enabled
- Wake on Pattern Match Disabled
|