Z170M Extreme4 Will Not Boot
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2679
Printed Date: 07 Jan 2025 at 6:42pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z170M Extreme4 Will Not Boot
Posted By: gScott
Subject: Z170M Extreme4 Will Not Boot
Date Posted: 17 May 2016 at 9:23am
|
I have a new Z170M Extreme4 that will not boot. All the gear was new in box from NewEgg It has an i3-6100 3.7G Pro CPU 2x4GB HyperX Fury DDR4 2666 The first boot was just CPU/FAN, CPU Power, and ATX Power. I got the requisite 3-beep post report from the speaker. I then placed the 2 DDR chips in A2 & B2 per manual. No more post report; however no video out or any other indication of a bios load/post I tried the chips in A1/B1, A1/A2, and B1/B2 thinking it would make a difference. Out of frustration I thought maybe the fact that the chips were PC4 21300's were a problem and went to a local retailer and bought some standard DDR4 2133 (PC4 17000) . Still no Joy. Are there any suggestions here before I sl*g the whole box in the backyard with my blowtorch? :P |
Replies:
Posted By: parsec
Date Posted: 17 May 2016 at 11:06am
|
What video source are you using, Intel iGPU or video card? Why do you think the memory is the problem, since all the parts of the PC are new? It easily could be something else. Have you cleared the UEFI/BIOS since you installed the memory? If not, you really need to, particularly after moving the DIMMs around, and changing to a different model. Memory compatibility problems is a reality with DDR4, even with all of two PC platforms that use it, X99 and Intel 100 series chipsets. X99 was first, and Skylake processors like yours have differences in their memory controllers relative to x99. Can you find the full model number of your HyperX memory, and the second memory you tried? There are several models of HyperX memory listed in your board's Memory Support list: http://www.asrock.com/mb/Intel/Z170M%20Extreme4/?cat=Memory" rel="nofollow - http://www.asrock.com/mb/Intel/Z170M%20Extreme4/?cat=Memory All DDR4 memory will run at 2133 by default. The highest rated speed of DDR4 memory must be set using the memory's XMP profile, or manually with UEFI/BIOS settings. The maximum speed of the memory is not the issue. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: gScott
Date Posted: 17 May 2016 at 10:01pm
|
I am using the iGPU and Yes, per other posts I did go through the BIOS clearing process prior to posting. The reason I thought it was the memory? because according to most of the posts I've read here memory compat. does seem to be an issue. To clear the BIOS I swapped the jumper, pulled the battery, drained PSU, and let it sit over the weekend. I'm assuming that would have done the trick. |