Fatal1ty 990FX Killer Broken
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=26807
Printed Date: 27 Jul 2025 at 1:13am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Fatal1ty 990FX Killer Broken
Posted By: Darklo
Subject: Fatal1ty 990FX Killer Broken
Date Posted: 11 Oct 2023 at 5:00am
| Hello recently I updated the BIOS on my computer from Windows 10. The process did not end and the equipment has been broken. I have removed the chip from the BIOS and I am trying to reprogram it, I have tried to rename "990kill1.60" to "990kill1.bin" and put it on the chip with USB Flash Programmer BIOS EEPROM series CH341A, but it doesn't work. Someone has the "bin" for this motherboard. Thank you |
Replies:
Posted By: kerberos_20
Date Posted: 11 Oct 2023 at 1:10pm
|
bios image is available on asrock download page, that 990kill1.60 is firmware binary (bin file) try it with NeoProgrammer, its superior to whichever software came up with your ch341a ------------- http://valid.x86.fr/diq4l4" rel="nofollow">  http://www.userbenchmark.com/UserRun/47132492" rel="nofollow - userbenchmark |
Posted By: Darklo
Date Posted: 11 Oct 2023 at 9:37pm
| Hello friends, my computer has taken away hours of sleep and thanks for the answer. I have fixed the problem by moving the CMOS jumper to clean CMOS, PIN 2, 3. reset, standby, power off, move CMOS jumper to PIN 1, 2. and reset. And it works. You mount RAM, hard drive video card and run the STARFIELD. Thanks a lot. |