A620M Pro RS - 5 Beeps but everything is working
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=26982
Printed Date: 26 Dec 2024 at 6:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A620M Pro RS - 5 Beeps but everything is working
Posted By: EdWise
Subject: A620M Pro RS - 5 Beeps but everything is working
Date Posted: 14 Nov 2023 at 9:39pm
|
I recently upgraded my PC to A620M Pro RS AMD Ryzen 7600X 32GB Ram @5600 (AMD Expo) Nvidia Geforce 3080ti When I start the PC I get 5 short beeps. After that, the PC starts up just normal and runs stable. Temperatures seem OK for both CPU and GPU, even under load and I don't get crashes. Any way to fix this?Or can I just ignore it? Thanks for your help! ------------- Thanks Ed |
Replies:
Posted By: Xaltar
Date Posted: 14 Nov 2023 at 10:46pm
|
It sounds like the board isn't properly detecting the display. It isn't an issue if the system is functioning correctly otherwise. If it's bothering you then you can try different display cables/outputs until you find a combination that eliminates the beep code. Alternatively you can disconnect the PC speaker (if you have one connected). This kind of thing happens because of how complicated Display output standards have become, same pin outs etc but different firmware specs. It's only ever an issue if you are not getting a display at all, in which case it's most often the cable that isn't compatible with the signal and/or display. I hope this helps, enjoy the system  ------------- 
|
Posted By: EdWise
Date Posted: 15 Nov 2023 at 5:49pm
|
Thanks Xaltar for your quick answer! I am going to try out another display output. If that doesn't help, I guess I will just ignore it... :) Maybe a future firmware update is going to take care of this. ------------- Thanks Ed |