Intel Motherboards - Fatal1ty H97 Killer enable TPM-S

Print Page | Close Window

Fatal1ty H97 Killer enable TPM-S

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=27017
Printed Date: 28 Sep 2024 at 1:43am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Fatal1ty H97 Killer enable TPM-S

Posted By: Eismeer
Subject: Fatal1ty H97 Killer enable TPM-S
Date Posted: 23 Nov 2023 at 5:34pm

I have:
- Fatal1ty H97 Killer bios 1.60
- TPM-S Module V 1.2 (Nuvoton NPCT420) REV.G/A 1.01
- E3 1271 v3

The manual for the motherboard and the module specifications state support, but there is no support in the bios menu!

I carefully studied all the documentation and the forum - I did not plan to ask technical support for a BIOS upgrade for the TPM 2.0 module. That's why I was looking for TPM 1.2 - it wasn't easy

Replies:

Posted By: myabrownn
Date Posted: 03 Dec 2023 at 2:07pm

I feel your frustration. When I was troubleshooting my PC after a dusty desert safari dubai trip, I had a similar BIOS hiccup.

Try this: Check if there's a BIOS update available on the motherboard's official website. Sometimes, they release updates that might not be visible in the menu. If you're still stuck, reaching out to technical support could be your best bet. They might just have the key to unlocking that TPM 2.0 support.

-------------
mya