Print Page | Close Window

B650D4U-2L2T/BCM

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=27113
Printed Date: 27 Dec 2024 at 9:30pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: B650D4U-2L2T/BCM
Posted By: b433cd
Subject: B650D4U-2L2T/BCM
Date Posted: 20 Dec 2023 at 3:14am
1. Is embedded Broadcom NIC firmware of this board supposed to come from ASRock or from Broadcom? I bought two boards, same hw release version 3.04 and one displays NIC subvendor is Broadcom while the other board shows ASRock. If niccli Broadcom application is used to install Broadcom firmware on the ASRock subvendor one - it is being rejected, while flashing firmware on the other board goes just fine. Would using -force option for flashing firmware on the ASRock subvendor one be OK or there exist ASRock special BCM firmware?
2. SSD M.2 4TB Crucial T700 NVMe PCIe 5.0 x 4 is installed in the M2_1 slot. Works just fine. BMC->Sensors M.2 temperature shows N/A as well as "ipmitool sensor" command shows TEMP_M.2 -> na? Is it Crucial nvme or board BIOS firmware to blame for this?
3. Can't have SRIOV VFs added - BIOS,CPU,IOMMU and BCM NIC SR-IOV options are all enabled, iommu=on added as kernel boot parameter. No luck when echoing number of virtual functions in sriov_numvfs. Clues regarding SRIOV support and what parameter/s in BIOS or BCM NIC being missied to enable?

Thank you for your time reading this!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net