Connection AIO (Navis F240) in B550 Pro4
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=27440
Printed Date: 21 May 2024 at 6:07pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Connection AIO (Navis F240) in B550 Pro4
Posted By: specu
Subject: Connection AIO (Navis F240) in B550 Pro4
Date Posted: 12 Jan 2024 at 4:16am
|
Hi, I'm little confused about connecting mine AIO (Endorfy Navis F240) to mine motherboard ASRock B550 Pro4. In AIO manual it says I need connect 4-pin connector from fans to CPU_FAN and 4-pin connector from pump to CPU_OPT. Unfortunately I do not have CPU_OPT connector on mine B550 Pro4. How exactly I should connect mine AIO in that case? 4-pin connector from fans to CPU_FAN1 4-pin connector from pump to CPU_FAN2/WP ??? Thanks in advice. |
Replies:
Posted By: Xaltar
Date Posted: 12 Jan 2024 at 4:18am
|
WP = Water Pump so CPU_Fan2 is where you want to connect your pump to. ------------- 
|
Posted By: specu
Date Posted: 12 Jan 2024 at 4:45am
| What about connector from AIO fans, they should be connected to CPU_FAN1 header? |
Posted By: Xaltar
Date Posted: 12 Jan 2024 at 6:49am
|
That is the recommended header yes. The only more important connector is the water pump though, they can draw more current than fans so it's best to connect them to the recommended header on the board (any header labeled WP). Fans can be connected to any header but for simplicity sake, if it's to cool the CPU, connect them to a CPU fan header. -------------
|
Posted By: specu
Date Posted: 12 Jan 2024 at 7:10am
|
Great. I assumed I should connect it in this way but better ask than make mistake that I will regret later ^^ Thank you! |