asrock 890gx extreme 3
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2757
Printed Date: 05 Jan 2025 at 3:27pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: asrock 890gx extreme 3
Posted By: jelee
Subject: asrock 890gx extreme 3
Date Posted: 01 Jun 2016 at 2:51am
|
Hi, i got a strange error in the dokter debug display, i cant find it in the manual of the motherboard ftp://europe.asrock.com/Manual/890GX%20Extreme3.pdf it just is saying LP, could someone tell me something more about this message? thanks in advanced
|
Replies:
Posted By: ASRock Expert
Date Posted: 01 Jun 2016 at 3:15am
|
Reset Your BIOS, try it with just one RAM and with just the on-board GPU. ------------- 990FX Extreme 9 MOD P1.70 AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
Posted By: jelee
Date Posted: 01 Jun 2016 at 3:31am
|
Cleared the Cmos already its just a clean motherboard (no devices) and tryed a 1kingston and a 4gb Crucial (same result) |
Posted By: Xaltar
Date Posted: 01 Jun 2016 at 3:43am
|
Could you give us your full system specs please, including power supply make, model and capacity. I am not sure but LP could be Low Power. ------------- 
|
Posted By: jelee
Date Posted: 01 Jun 2016 at 4:02am
|
thats what i tought, but was not sure.. (could not find any refference to it) Powersuply 500watt (Spire) (no devices connected) AMD Athlon II X4 1gb kingston |
Posted By: jelee
Date Posted: 01 Jun 2016 at 4:32am
| The power should be under the 350 watt (so just tryed a 350 watt and a 300 watt suply) but stil the LP message.. |
Posted By: Xaltar
Date Posted: 01 Jun 2016 at 4:34am
|
Silly question but did you connect the 8 pin CPU power to the board? -------------
|
Posted By: jelee
Date Posted: 01 Jun 2016 at 4:40am
| The PSU got 2times 4pins (that should be alright?) |
Posted By: jelee
Date Posted: 03 Jun 2016 at 2:09am
| Anyone that can help me? |