Horrible X670E Steel Legend Firmware Upgrade Again
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=27687
Printed Date: 26 Dec 2024 at 8:51pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Horrible X670E Steel Legend Firmware Upgrade Again
Posted By: mrbill
Subject: Horrible X670E Steel Legend Firmware Upgrade Again
Date Posted: 21 Jan 2024 at 5:54am
Figured I would give FW 2.06.AS03 a try since I was running 1.30 AS05. Ran into another ASRock nightmare setting supported RAM from 4800 to 5200. PC kept rebooting noting a bios error one time, a memory error the next, a missing Windows file the next, etc. Tried rolling back to 1.30 AS05 but after confirming the new bios, the PC would boot back into Windows saying a Windows file was missing but it shouldn't have booted into Windows anyway. Finally on the tenth try I was able to roll back. Why do I only run into these problems with ASRock products?
-------------
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X
32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K
WD SN570 2TB
MSI NVIDIA GeForce RTX 3080 Ti
Win 11 Pro
|
Replies:
Posted By: 7900x670e
Date Posted: 21 Jan 2024 at 6:36am
I see 2.06.AS03 is still in beta. Maybe wait untill it's official.
I run gskill 2x32 cl30 6000 fine on my steel legend x670e on 6000.
But mine have hynix chips, yours have micron chips.
Do you use the ramslots mentioned in the manual for 2 dimms, which are A2 and B2 ?
Your RTX 3060 works fine in your system ?
I can't get both of my newest firmwared MSI/EVGA GTX 1070ti's to work in the pcie 5.0 slot.
|
Posted By: mrbill
Date Posted: 21 Jan 2024 at 9:30am
Official or not, these types of issues are unfortunately all too common when updating ASRock FW even with all components on the QVL and RAM installed as instructed. I've had similar problems on prior official FW versions as well. As far as my 3081TI goes, it runs fine.
-------------
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X
32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K
WD SN570 2TB
MSI NVIDIA GeForce RTX 3080 Ti
Win 11 Pro
|
Posted By: tim73
Date Posted: 24 Jan 2024 at 7:16am
|
That means the memory is not stable, not the problem of the BIOS. You can run the memtest for a longer time and I'll bet there will be an error.
|
Posted By: tim73
Date Posted: 24 Jan 2024 at 7:18am
|
You can run as an admin "sfc /scannow". Probably there are corrupted files.
|
Posted By: mrbill
Date Posted: 26 Jan 2024 at 8:13am
@tim73
Memory passes Win diagnostics and corrupt files are the three common bluetooth files that SFC reports as corrupt that are even there on a fresh install. Been down this road many times with updating this MB's FW. Seems when new FW is released, ASRock drops support for memory on the QVL as other threads note as well. This box runs solid on 1.3AS05, and I won't try another FW update knowing the very buggy history with ASRock updates.
-------------
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X
32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K
WD SN570 2TB
MSI NVIDIA GeForce RTX 3080 Ti
Win 11 Pro
|
Posted By: Katana1074
Date Posted: 28 Jan 2024 at 5:50pm
Hi there....
I Would check your bios and make sure that memory context restore and powerdown mode are both enabled.....
-------------
CPU: RYZEN 7950x | Motherboard: ASROCK X670E TAICHI | GPU: MSI RTX4090 LIQUID X 24GB | RAM: FURY X DDR5 C40 | Hard Drive: INTEL OPTANE 900P 480GB,1 x SAMSUNG 980 PRO 2TB,2 X ADATA S8200X 2TB
|
|