i7 6700K GPU/IGP overclock not working?
Printed From: ASRock.com
Category: OverClocking(OC) Zone
Forum Name: OC Technical Discussion
Forum Description: OC enthusiast's tech talk
URL: https://forum.asrock.com/forum_posts.asp?TID=2780
Printed Date: 22 Dec 2024 at 9:04am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: i7 6700K GPU/IGP overclock not working?
Posted By: jcsbanks
Subject: i7 6700K GPU/IGP overclock not working?
Date Posted: 03 Jun 2016 at 9:17pm
|
I have above CPU with air cooling. It runs 4.7GHz no problem on the CPU which I have turned down to 4.6GHz to give stability margin (also cache at x46), but the GPU will not increase beyond 1150MHz, only reduce. I want to try it at 1300MHz. I have tried in UEFI and A-Tuning. UEFI is updated. I can set 1300MHz but when running FurMark and then CPUID HW monitor it only shows 1150MHz or below. Board is Z170 Extreme4. What am I missing? Thanks.
|
Replies:
Posted By: clubfoot
Date Posted: 04 Jun 2016 at 3:30am
|
Did you select the gpu frequency manually? ------------- https://valid.x86.fr/1tkblf" rel="nofollow"> 
|
Posted By: jcsbanks
Date Posted: 04 Jun 2016 at 3:52am
|
Yes. The only value I can find is in two places in UEFI, on the overclocking page and further down. Have you been able to do it and know the steps required?
|
Posted By: clubfoot
Date Posted: 04 Jun 2016 at 8:23am
|
Sorry no, I use dedicated video cards, I found the following article: http://www.anandtech.com/show/9533/intel-i7-6700k-overclocking-4-8-ghz/7 ------------- https://valid.x86.fr/1tkblf" rel="nofollow">
|
Posted By: jcsbanks
Date Posted: 07 Jun 2016 at 5:28pm
|
I have sent a query to ASRock through the A-tuning program. Hopefully the email sent as it showed busy for a while but then didn't confirm anything on the screen or by email. I don't need a dedicated GPU, just want to get the most out of half of the die area on my 6700K that is dedicated to the Intel graphics which are half decent but could do with a tweak :)
|
Posted By: Enverex
Date Posted: 03 Aug 2016 at 3:37am
|
I have the exact same issue. I'm using an i7-5775C on the Z97E-ITX/ac motherboard and I can set the frequency in the BIOS, but it doesn't actually do anything. I can set it to 1250 or 1400 (from 1150) but it just shows as 1150 still when it's in use. Did you find a reason for this or a solution?
|