Memory upgrade at XFire Esata2
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2860
Printed Date: 23 Dec 2024 at 6:57am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Memory upgrade at XFire Esata2
Posted By: CKCMorgy
Subject: Memory upgrade at XFire Esata2
Date Posted: 18 Jun 2016 at 1:34am
Hi all
I still have a XFire ESata2 in use, with 2 banks of 4GB (each) PC2-6400 DDR2 800MHZ DIMM installed, working perfect.
Now I wanted to upgrade to 4 banks, 4GB each.
Manual says maximum of 16GB RAM, so it should work fine.
I ordered exactly the same modules, so I have 4 modules now, every module working fine when installed alone.
But when I install all 4 modules at once, I get no picture output.
BIOS is up to date.
Installed setup is a AMD Phenom X3 triple core 2,3 GHz cpu and a GeForce 9500 GT 1 GB RAM.
Is there a way / is this a known problem?
Please help
thanks
|
Replies:
Posted By: wardog
Date Posted: 23 Jun 2016 at 12:23pm
Which XFire ESata2 is it you have there?
You're
attempting to run two separate 8GB(2x4GB) mem kits. The stickers on
EACH stick, do the timings and voltage listed on all 4 sticks match?
I'd
really like to see CPU-z screenshots of both kits, 2 sticks x 2
screenies, to verify. Look closely at the sticks when you provide these
and install 2 sticks whose serial number coincide. This will keep each 2
sticks as they came packaged as 2x4GB kit.
I'll keep watch for your screenshots.
|
|