b650e Taichi error code 55 randomly
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=29333
Printed Date: 23 Jul 2025 at 9:31pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: b650e Taichi error code 55 randomly
Posted By: LegendaryYam
Subject: b650e Taichi error code 55 randomly
Date Posted: 08 Feb 2024 at 4:42am
| My PC has been working for around a year now. It's a 7950x3d and 4090. I have 32gb Trident Z5 Neo. Everything has been running great. I was running in Linux this morning, powered off to reboot to Windows, and now I get this error code. I've tried clearing CMOS and unplugging from the wall for 30 minutes, but neither seemed to have helped. Any suggestions or ideas? Thanks! |
Replies:
Posted By: Xaltar
Date Posted: 08 Feb 2024 at 6:27pm
|
Try removing and reinstalling your RAM. If that doesn't work then follow the steps here: https://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal If you still can't get the system to POST then I am afraid there is a chance the CPU's memory controller could have died on you (IMC). Hopefully that isn't the case. If it is you will need to check with intel about warranty replacement (RMA) as I doubt your store warranty is still in effect. If it is then go through the place of purchase. Good luck  ------------- 
|
Posted By: Xaltar
Date Posted: 08 Feb 2024 at 6:30pm
|
There is also a chance one or more of your RAM modules could have failed. You can test this by installing a single module in slot A2 and cycle through all your modules. If you get no POST with any of them then the odds are on the CPU's IMC. It also couldn't hurt to try a different PSU, a bad/failing/marginal PSU could be causing the CPU's IMC to fail to initialize correctly. Sadly there are a lot of factors that can cause this issue. -------------
|