7950x3d and x670e TAICHI memory
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=29624
Printed Date: 02 Jul 2024 at 1:38pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 7950x3d and x670e TAICHI memory
Posted By: Kaber
Subject: 7950x3d and x670e TAICHI memory
Date Posted: 20 Feb 2024 at 1:50pm
Hello
What might be causing the issue when I am using 4 sticks (2 kits of same memory 2x16GB) of 16GB 6000mhz ram, it seems to run only 3600 mhz altho EXPO profile is loaded. When I remove 2 sticks (I leave 1 kit in slots A2 and B2) it goes up to 4800mhz, but not 6000 as specified in EXPO. What am I doing wrong? Some posts say that it is even CPU limit that it doesn't get higher frequency.
Alar
|
Replies:
Posted By: ManoFx
Date Posted: 28 Jun 2024 at 2:05am
|
I guess thats the limitation of using 4 slot rams .. 2 slot rams give full speeds
|
Posted By: Jose1001
Date Posted: 28 Jun 2024 at 4:52pm
Hello mate, I have a 7950X3D on an Asus X670E Hero and 2x32gb G.Skill 6000MHz, on day 5 I buy an ASRock X670E Taichi to replace it with the HERO, and I am very interested in this. I would swear I've seen a video on Youtube of 4x32gb at 6000MHz on an X670E Taichi, but I guess I put all the Ram values manually,.... I'm still paying attention to the post and if you get it I still dare to buy 2x32GB more for myself, best regards. Note: Rams are also set to 3,600MHz when there is a bent pin in the socket.... check it out, although I doubt it because you couldn't put them at 4,800MHz in Dual Channel or activate EXPO. Best regards
-------------
-Ryzen 7950X3D -ASRock X670E TAICHI -G.Skill Trident Z5 Neo DDR5 CL30 2x32gb 6000mhz
-Asus Strix RTX 4070ti OC 12gb -Seasonic Prime TX-1000 -Crucial T700 2Tb+Samsung M.2 990 Pro 2tb
-EK-WatersCR360
|
|